Sanding & Painting for the Beginners for a Woodworking Project plan

This article will show you the two most vital things that you need to perform while creating a woodworking project. The first one is sanding and the second one is painting. However, take a look at this article in order to know more about these two things. 


Usually when working with wood, after chopping it up and drilling holes the exterior will be incomplete with ugly burs as well as splinters. It is an easy repair with fast sanding, however, with a relatively infinite quantity of types and grits of sandpaper and sanding tools, this can get complicated. The main kinds of sanders we’ll cover are hand sanders, belt sanders, and orbit sanders.

Woodworking Plans Banner

Hand Sanders are the easiest and most affordable sanding you are able to do and will probably work nicely for the majority of little projects. You purchase the hand sander that is actually a plate with a handle and after that you need to connect pieces of sandpaper to the bottom. The most important benefit of a hand sander is it’s cost-effective. It needs a little bit of time, but the truth is you can gain a completely appropriate end through this.

Orbital sanders are the following level of sanding. They use sanding disks for excellent control over the exterior and are sufficiently small to be effective for limited areas as well as tiny electronics projects.

Belt Sanders are the weightiest and strongest sanders here. But how do they work? Well, it’s quite interesting. They get started by driving a belt of sandpaper around which enables them to immediately chew through plenty of material. Belt sanders are effective for big flat objects that require finishing, and will normally be extremely massive for our uses.

No matter what kind of sander you use, you will make use of sandpaper. Most of the sandpaper is aluminum-oxide and is available in various grits. The grit is a sign of how wonderful it is and will figure out what you’re working with it for. Grits generally vary from around 20 to 1000, 20 being incredibly coarse and 1000 is pretty fine. While sanding, in case you have plenty of materials to eliminate and really should smooth things out, a reduced or coarse grit will be perfect. Once you have sanded with the coarse grit move to a better grit, generally up around two hundred for finishing.


Once you have created your individual project and are searching for that expert, finished look, coloring can perform amazing things. There are basically two kinds of color widely used and picking a single is determined by the material and type of use your project will see.

Latex paint is mainly water-based paint which is highly utilized in normal applications. The paint is simple to clean up just by using soap and water and more convenient to apply. It is long-lasting and will stick to most of the components.

Oil-based paint sticks far better to exteriors and needs to be utilized if you are painting over earlier coats of oil-based paint. The downside to oil based paint is that the clean-up is difficult: paint thinner or mineral oil ought to be utilized.

TedsWoodworking Plans and Projects

Leave a Comment

Easy-to-understand step by step instructions. Every plan has simple “hold-you-by-the-hand” instructions that will assist you to complete your projects quickly.