Offset Detail Sander | Popular Woodworking

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

When doing repair work, I often have to inlay small patches of wood into a finished surface. To help level the patch afterward without marring the adjacent surface, I made up several of these little detail sanders, band sawing them from 34“-thick hardwood scraps.

A strip of sandpaper wraps around the foot, with one end tucked into a notch on top and the other end clamped under a small metal plate that’s screwed into a recess under the handle. The angled handle (offset by about 30° to the foot) allows a good grip and firm downward force on the foot. You can also invert the sander and use the rounded top of the foot for aggressively sanding a small area.

I find that a 4″-long handle with a rounded end is comfortable and provides good leverage. You can make the foot any size you like (mine are about 112” long); just make sure to sand the bottom truly flat. I have six of these and each is outfitted with its own grit, which is marked on the tool.  Sarah Dieterichs


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

TedsWoodworking Plans and Projects

Leave a Comment

Easy-to-understand step by step instructions. Every plan has simple “hold-you-by-the-hand” instructions that will assist you to complete your projects quickly.