We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
Bullet-Catch Bench Dogs
When I built my workbench, I drilled round bench-dog holes in the top so I didn’t have to cut square mortises. Being a thrifty sort, I didn’t want to shell out for store-bought dogs, so I made my own.
At first, I thought all I’d need was a couple 3/4″ dowels with flat faces cut into them at a slight angle. They worked, but I couldn’t leave the dogs in the holes when they weren’t in use—they fell right through!
I had some leftover bullet catches from another job, so I installed a pair in each dog. They’re spring-loaded, providing just enough pressure to keep the dogs in place.
The catches have a lip, so I supported the dogs in a V-block and drilled shallow counterbores to sink the lips below the surface. –Serge Duclos
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.